I have stripped down the simple workings of my Flymo Domestic 400L, there is a simple system external mag adjacent to a sealed condensor/HT lead. I have checked the plug, checked the corrosion on the mag surface and even checked wiring to the throttle switch, but I can't get a spark
does not have points.
not likely to have failure of the 'coil'.
are you sure there is no spark?
andy marsh all one word at ntlworld dot com for further help
andy marsh
July 2010
I am sure this machine had contact breaker points under the flwheel, clean/replace points
howtomendit.com for free repair help, information and advice.
