how can i fix my Valliant Boiler Ecotech?

My name is Darren i'm a gas engineer you need to refill the system feel free to call me and i can take you through it step by step 07947465288

Darren
May 2010

i would not do what dave said. go to hotpress and look for silver hose and open it up, get someone to keep an eye on pressure and stop it at 1 bar that should top it up

stephen
May 2010

you should have a silver 'key' that you place in two brass slots underneath, the fill valves are brass and easily damaged if you do not have a key, use a screwdriver (Carefully) If you look under boiler, you will see 2 squarish bras blocks and a flat screw in each, rotate these and you eill start to fill. if you look carefully there is a pin in each that stops over rotation. use the largest scredriver you can get in the slots - using too small a driver will chew up the slots.

Dave
May 2010