need to fix my aerox?

jack if it has holed the piston then i would suggest you find out why,its either the ignition timing too far advanced,the compression ratio too high or its running very weak and hot.if you dont find the reason out it will just do it again trust me been there and done it in my earlier days.:)

adam bike doctor
June 2010

i took it apart earlier to find a massive whole in the piston like almost half the size of the whole top of the piston so im goin to flush the engine through replace the piston and get the head bored out again.

jack
June 2010

yep i agree with rayb the problem is either the piston or rings or the big or small end bearing or a main bearing cage breaking up.to be honest i would punt for a main bearing breaking up and the damage you can see on the plug will be where the cage from the bearing has been thrown up the transfer ports into the combustion chamber.if it is that the the engineneeds to come out and the cases will have to be split.my favourite job :)

adam bike doctor
June 2010

ok mate cheers that is what most other people have said to me aswell so i am probably goin to take it to a shop 2moro. cheers for the help

jack
June 2010

do you still have good compression.if not then you might have a hole in top of piston which means a new piston will have to be fitted .

rayb
June 2010