Mend > Dishwashers

Mend Hotpoint Ariston LFT144/HA Dishwasher Error Drain Pump

Hotpoint Ariston LFT144/HA dishwasher flashes led 1 and 3?

My LFT144/HA Hotpoint Ariston dishwasher flashes led 1 and 3. It startes, drains water, loads water an than starts running the drain pump with error code leds.
At inspection there is no water leaking anywhere.
Any hints? Where can I find the service manual?

Gianluca
June 2010

Hotpoint Ariston Hotpoint Ariston LFT144/HA Kitchen Appliances, Dishwashers Dishwasher Error Drain Pump

Right thought.

Good pressure switch checked with a ohmmeter.
Just inflated into the pressure switch tube in opposite direction in respect of the switch.

Problem resolved. Money spent: zero.

gianluca
June 2010

No way to find the service manual even by paying.

It seems that the water ingress stays for too long and the counter-flood protection goes on starting the drain pump that stays on until you switch off the unit.

That led me to suspect the pressure switch does not stop the water from coming in and the maximum time allowed expires.

I emailed Hotpoint staff that replied in one day that leds 1 and 3 stands for ... possible fault of the pressure switch!
BINGO!

I will check for a clean pressure sensor tube and for a working switch and will report here.

Bye

gianluca
June 2010