how do i put the drive belt on my peugeot elyseo 125 1999?

undo the transmission cover on the left hand side of the engine and take it off,then you will see a variator on the left and a clutch bell on the right,undo the nut on the end of the variator(using an impact gun) and then lean out all the old belts remains and put the new belt over the rear pully and pull it into it a bit and then refite the end of the variator and the nut.use some loctite on the nuts thread as a precuation to stop it falling off .do it up tight too!

adam bike doctor
July 2010