Vuaxhall combo starter motor removal 2006 1.3 td?

remove radiator expansion tank clip and swing tank to front of engine,remove wiring connections from fuel filter and two 13mm nuts on bulkhead and swing filter assy onto top of engine,look down onto top of bellhousing you will see an oval grommet,the bolt is in there should be a torx 45,later models have a 6mm hex,be very careful with this bolt,drop it or a tool into bellhousing and it is a g/box out job,get one person to do this bolt and another under motor to concentrate on the starter,good luck

wickham
July 2010