faulty door lock. l.d.v. convoy?

you may need to put a couple of washers between striker plate and "b"post,washers about 1"od by 1/4"hole are just right .

k
August 2010

sounds as if the hinges have been strained and the door is out of line, with the door open get a large say 1"1/4 socket and place it between the door and the door pillar where the hinges are mounted and exert pressure by trying to close the door,this tends to shove the hinges back to where they should be,know it sounds rough but if you take your time you wont damage anything and it is better than buying new hinges which are expensive for these,good luck

wickham
August 2010