beko sensor tumble dryer?

BEKO DRVS73Won sensor drying, tumble does not turn off when dry, any idea what needs to be replaced?

paul
September 2018

Hi fitted new belt then realised element had burnt out fitted first not working then secound not working what else can I try please thanks Chris.

chris
January 2014

I have a beko condenser tumble dryer and I need to change the water tank sensor but don't know where to start

Alex bmth
October 2013

Hi denis had the same problem with my beko drvs73w i checked the heater element that was ok checked the thermostat that was ok checked the sensor just above the thermostat that was ok checked the front sensor just behind the front panel that was ok tried it again still no good then found another sensor at the bottom of the drum two metal bars held in by two screws took this of cleaned out the fluff put it back together put the back panel on over the heater element pressed the reset button and it's just dried two load's of washing ok on extra dry i'm just trying it on rapid dry i think thats the only time the heater element heat up fully seems to be working ok now

dave
December 2010

The bottom half come on after about 30secs. that is when the drum is turning anti clockwise.Then when the drum stops and begins to travel in a clockwise dirction the bottom half of the element on goes off and does not go back on even when drum stops and rotates otherway again.

denis
October 2010

how long do you let the element work?.1st element comes on and then sometime later the other half (full heat ) comes on.not sure on timings but there is a delay.like you say it only happens on auto dryer settings.

ck
October 2010