How can I start my Rover 400 immobiliser problem?

I have the same problem. I have a Rover 414 SI and don´t have a EKA code to unlock start up engine system .

I need help. Someone know the website that generate keys (EKA codes) to rover 414 SI?


Thanks,

André
December 2013

i dont have an eka...how do i get my car started

anthony
September 2012

change the battery in the key fob.

davey g
August 2011

Dont have a code and tryed most things but still cant start

Gemma
June 2011

You need a code, i have the same problem too, my rover's engine wont start, i hear a warning like sirene sound whenever i try to turn the engine on, i am wondering if overfilling the oil in the engine during service can cause this also ? anyways people said i need a code,override code, i tried Rover they dont have my car's code in the database which sucks, if you are luckier than i am, you'll get a code from a sub dealer besides rover company herself

Samuel4rmNigeria
December 2010

hi how can i find my code?

paul
July 2010

what if you dont have the access code?

tim
January 2010

i have the same problem what i do is have some one hold the key in the start position and i take a cable of the battery and then put it back on while the other person holds the key in the start position me and my brother have got it down to a fine art now ;)

mr bodge
March 2009

I have had the same problem. if you still have the accesss code you can try this..
ENGINE IMMOBILISATION OVERRIDE
If the Plip key is lost or does not function, the emergency access code (EKA) can be used
to override the system as follows :-
1. Insert the key into the drivers lock, and turn to the lock position.
2. Hold the key in this position for 5 seconds.
3. Now using the code turn the key to the unlock the number of times of the first digit.
4. Now turn the key to the lock position the number of times of the second digit.
5. Repeat for the last two digits.
6. After the code has been entered, turn the key to the unlock position, and check to
see whether the Alarm LED has stopped flashing, and the engine will start.
If an error is made, open and close the door and repeat the sequence. If 3 unsuccessful
attempts are made, the system will lock out for 10 minutes, before another attempt can
be made.
I have the same problem. The above did not work for me but it has for others I have spoken to.

mark
August 2006