Fisher & Paykel washing machine Smark drive9 excellence?

This is response to Lincoln appliance's answer. Thank you very much, you were spot on and my machine now works. Can't thank you enough.

Rebecca
February 2011

his is fault code 43 which is the out of balance switch has a problem. Usually caused by corrosion getting in to the switch & it sticks in the on position. It is a microswitch on the right hand side of top panel. Turn power off at wall. Open top panel. Remove one screw holding main control box down. Gently lift control box up & locate switch which will have two wires usually a yellow & a white. Remove wires & then the switch. Fit new switch & re attach the two wires either way around. Close panel & power on.

Lincoln Appliance NZ
February 2011