piaggio zip 50cc indicators wont work! help please!!?

When I turn the key nutin happens but I'll use the kick start and it starts up first kick but the break light and indacater don't work 50cc piaggio zip help please

bigT
March 2016

why wont my indicators and horn work on my paiggio nrg mc3

luke
June 2012

what do you mean 'don't work'?

I needed to replace the indicator relay

alex
March 2011

it will be the regulator rectifier that is at fault,piaggio in their infinate wisdom decided to combine the indicator relay and the regulator rectifier in one unit,it is under the rear seat cowling on the left hand side ,fit a new one and i bet its ok they always go wrong,if you want you can just pull the two relay wires out of the multiplug connector and fit a normal relay to it i think the wires are the two at the back and it may be purple and brown or something like that.

adam bike doctor (of milton keynes motorcycle centre)
February 2011

have you looked at indicator flasher unit?
Check all earths are tight and free from rust?

Very rare that this is anything complicated. WD40 may help but check Unit its is more than likely this. very easy to replace, throw away item so dont bother trying to fix it.

bb
February 2011