Recent: How to recoil the starter spring - Champion R484TR?

Mend Ravenheat Home Heating Systems

Mend Heating, Home Heating Systems
Find out how to mend it for free.

Ask Question
Mend Heating, Home Heating Systems
Click here to mend Ravenheat home heating systems

Mend > Home Heating Systems

Mend Heating, Home Heating Systems

no hot water but radiators work ok?

Hello. We have a Ravenheat csi 85 - csi 85t boiler. there is no hot water unless radiators are on. on a earlier post on here a reply said it is a hot water stat on left of boiler that would be at fault. Is this the D.H.W sensor or the overheat cut off thermostat ? Can i replace it myself or is it a job for a skilled man. Thanks , Martin

Martin Sharpe
March 2011
thanks for that very helpfull

martin sharpe
March 2011
If your model is similar to the older versions it will have a rubber diaphragm in the water section, these frequently tear and stop the hot water working unless heating is on at the same time. The diaphragm needs replacing, simple job if you can get the mains water turned off and get the water diaphragm section out, its usually only 6 screws and the section comes apart, mind how you prise it open though, there are springs in there and if it all pops out you won't know how to re-assemble! Careful.

Taliskerman
March 2011

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Hot Water Radiators Work Ok

Mend Heating, Home Heating Systems
Click here to mend Ravenheat home heating systems

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Heating, Home Heating Systems
Click here to mend Ravenheat home heating systems