zone open message?

i agree alarm guy,but to his credit he did say he not use it before,was same with the 9800 nick i had 3 fail,not go on the engineering prog,but touch wood never had a fail on the 9651,scantronic must be the easiest panels to prog if you you used to them,

gts
May 2011

RTFM time then

Alarm
May 2011

Hi GTS i virtually never have issues with the 9651, ive had 2 fail on me last year, which i think was just unlucky, failed on install. He wont respond, because he has no idea what we are talking about,

N
May 2011

anyway,he may get back to us (doubt it)

gts
May 2011

my money is that he has not programmed the zones out properly nick,

gts
May 2011

Check you havent programmed them by mistake as 2k2 4k7 if you have programmed them out for sure, then either the door or detector is still open circuit, use a multi-meter to check. If that dosent solve things the only other reason is a short between your +loop and the tamper.
If you get really stuck give use a call
07842 480037

N
May 2011

when you key in 02 then 0=nu press enter
do same for other zones.

gts
May 2011

you have not programmed them right check your programming scantronic panels are excellent,

gts
May 2011

you have not programmed the right

gts
May 2011