to much soap suds can cause this by blocking the pressure hose
Extending the waste hose can also cause it
check filter as suggested
ck
December 2011
Sounds like its aborted the final spin.If there isn't any water in the drum,end the program and respin.if the machine doesn't spin then replace the carbon motor brushes.If the machine does spin and finish its cycle,but you cannot open the door,then you have a problem with the door interlock.
ozone
December 2011
Might not of drained properly, If you have a filter on the front, behind the low kick panel, take it out, you will get some water with it, clean filter for the next time, as letting the water out, should clear it. assuming it is that
howtomendit.com for free repair help, information and advice.
