How to fix my lg front load washing machine model number wd-1238c?

Ok if you have no LEDs especially LED 1 then either there's a proplem with the pcb/failed,or you have a loose connection on the pcb.

If you are covered by lg warranty,contact them.

if you are not and you wish to investigate the problem then,

isolate the power(pull the plug)

remove the top of the washer, by removing the torx headed screws at either side on the back panel,

check the connectors on the pcb,

pull one connector off at a time making a note of its location,

refit making sure its nice and tight,

do this with all connectors,

if it doesn't fix the issue,then its highly likely that the pcb has failed.

you may want to consider having it repaired by lg under their fixed priced scheme,


hope this info helps

ps I hope its a loose connection

good luck........

paul
March 2012

I turned it off for 10 mins and it beeped when I turned it on, but still nothing. No display, nothing.

Brad666
March 2012

try pulling the plug and leave without power for 10 or so minutes,

paul
March 2012

I can get the CL off, but even when I do I have no power to anything. Any ideas, thanks for responding so quick.

Brad666
March 2012

Try pressing the Rinse+ and Pre Wash button simultaneously for 3 seconds,

CL stands for child lock,

use the above method to turn the CL off.

paul
March 2012