My Logic 30 is stuck in Post purge mode...Code 0...fan running continuous only, any ideas ?
Tony01
February 2015
Hi my boiler does not work off the stat. I have checked with a meter and the stat works fine has anyone got any idea what to check next thank you
Eddie
April 2014
you water pressure is to low, under the front panel are four taps, open the front twoo to fill the boiler, ( i do it to 2 bar) then turn the taps off , your system should then be pressurised, also bleed your radiators,
howtomendit.com for free repair help, information and advice.
