How can l reset my burglar alarm?

Good man :) all the best mate :) :)

e manno
September 2012

yup mate i have made a few bump keys in my time,and have a few lock picks that i got in a xmas cracker,coz it ilegal to buy em :-)also a nice lock pick gun that santa gave me,as you know mate,if you want in,we get in thats why the angels invented alarm systems hey,hey,:-)i want be a rock star !!

gts
September 2012

It's all about the tension and having a good set,including gigglers. You see these adds for pick and bump proof locks?,ain't true mate :)

All depends on how old it is, yes a new one takes longer than a used one due to less mech play, but I give it my best before the drill comes out :).

e manno
September 2012

mm,methinks you have a very murky past e manno,that may not lend itself to investigation :-)
so me shut up now too !!! :-)be well mate,

gts
September 2012

Even with my arthritic hands I can still pick a five lever, Yale or any euro style lock under 6mins.no need to drill unlike these lazy smiths today.

Can gain entry and shut any system down without any damage to property, so when the owner of the offending systems returns costs for our service is kept to the minimum.

Anyway I shut up now :)

e manno
September 2012

Sorry gts remote reset what was I thinking of, the word I was looking for was remote servicing doh! :),cut down on the number of engineers visits (his words).

Thank god I still have a say on the smiths side of the business,tech is his thing and I still run the locksmith side, he ain't getting his hands on that!,technology isn't my thing gts,i can still remember getting to grips with my first laptop and the access programs for gateways programming etc.

All was so simple in the early days, technology has left me behind but i defo know the older panels :)

e manno
September 2012

your welcome mate

gts
September 2012

Many thanks again gts and e manno for your advice, l will take a look at your choice of panels and get back to you.

klimt01
September 2012

Years ago gts I told my eldest to carry on with the scanny range, but he did his own thing.

Galaxy vista and now the prem, that's his thing, I told him many years ago to continue with scantronic, did he listen did he fook.

I used to like getting out there having a laugh with customers and being there for them when required, son has his systems on remote reset, it's all done in front of a pc.

Not my thing gts :(

e manno
September 2012

Yeh the 9651 is the one i'am not familiar with gts, but yes it's a little cracker :)

e manno
September 2012

even the 9448 has a plug onboard for a didgi,!!!!!!and they supply you with the lead too,

gts
September 2012

we have fitted loads o them mate,great value for dosh,easy for end user to use,and a doddle to prog,me lurves em :-) and,they look real good too !

gts
September 2012

Luvley choice of Panel gts, I've never fitted one but I have read through engineering and it looks and sounds a little cracker. Op won't be disappointed.

Hope op takes your advice mate :)

e manno
September 2012

oh and buy a new battery too,a 7 amp if you go for
the 9651,or a 2.1 if you go for the 9448

gts
September 2012

yes very easy to fit and programme go for the 9651 8 zone panel,you get engineering book with it,the sensors dont matter to the panel,when you kill the panel,mains and battery,the outside sounder may go off,not a lot you can do about it,just take careful note of ALL the wiring on your old panel,ie zone 1.zone 2 etc mark them with tape and right the zone number on it,plus mark the bell wire connections,be sure to remove the fuse from the spur unit that feeds the panel,i mean remove it,not just pull it out,if you take your time you will be fine,once all connections are made,fit the battery,the alarm will sound,key in 1234,then put cover on the end station,screw it up,then,and only then replace the fuse into the spur unit,y.this panel has a remote keypad,but if you want one with onboard keypad,go for the scanny 9448 its a 6 zone unit,easy to fit also,i hope this has been of help,if any bother come back,either myself or the rest of the guys will sort you out

gts
September 2012

Thank you for the advice gts. Would a Scantronic panel, be fairly straightforward to fit and be compatible with my existing system – front and rear door sensors, as well as three pir units?

klimt01
September 2012

make it a scantronic panel,and fit new battery with it as well ,good luck ,if you need any more advice come back to us,the guys on here are very clued up mate

gts
September 2012

sorry for give you bad news mate,adt will charge u an arm and a leg to give you code ,you dont need new system ,just a new control panel

gts
September 2012

Thanks for the quick reply gts. Looks like it will have to be a new system.

klimt01
September 2012

you have opened the unit,now it needs the engineering code to re-set it,and since its an old adt unit,its prob prog for engineer reset ,in short,you now have no alarm system,

gts
September 2012