Mend > Washing Machines

Mend Household Appliances, Washing Machines

hotpoint wma62 not working after replacing belt?

Hi, I was wondering if anyone else has replaced a hotpoint belt then to find the machine will not work. I have looked at the filter and that is fine. It did bang very hard against the sides a few times so not sure if unbalanced.
Any help would be fab as am at loss to find any thing wrong(so isy dad!)
Thanks Heidi

Heidi
October 2012

Hotpoint Household Appliances, Washing Machines Find Machine Work

just wondering why you replaced the belt in the first place ? check the brushes in the motor

keymatic
October 2012

Hello, thanks for reply, looked for loose wires all look fine. It will turn on and start a cycle, fill then drain straight away. The display comes on as normal when you start the cycle, then it just comes up with on and stops as if the cycle has ended
Thanks Heidi

Heidi
October 2012

You may have knocked something loose, open it up again and check loose wires etc that were not loose before

SD
October 2012

Free repair help for Hotpoint washing machines

Mend Hotpoint Washing Machines

Related Categories

Mend > Washing Machines

hotpoint wma62 not working after replacing belt?

hotpoint wma62 not working after replacing belt?

I can answer this question ...

hotpoint wma62 not working after replacing belt?

Other models...

How to mend ...

Mend washing machines ...

Hotpoint wt960?

How can i fix my Ariston AIB14 Advantage Washing Machine?

How to fit new seal on hoover washer/dryer?

Indesit wd11 wont start wash or dry cycle?

Whirlpool AWO/D 4505?