the bearings on this model are part of the drum/tub assembly it comes as one unit take front off back panel off drop motor and sump disconnect heater and all pipes to tub put a cable tie around the back of the plastic pin that holds the tub to the damper and extract pins remove blocks and unhook tub tip and lift out! you can do it in 1 hour with pratice :)
the washer man
November 2006
hi its drum bearings (nightmare) call an engineer
phil grimshaw
November 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
