How to remove front control panel Hoover Nextra HNL 662?
Our Naxtra HNL 662 has developed a fault were when selecting a 40 degree wash for 45 mins and when pressing start the progress indicator panel defaults to the 15 minute mark. I suspect dirty switch contacts so I need to remove panel to access them to clean
undo the lid, remove 2 side rails and remove 2x 7mm studs which are located at front l/h and r/h corners, there are 3 lugs which hold the panel around the soap box which need pressing out of the way, you can do this with a screw driver while pulling on the panel and it will release, its normally the selector thats dodgy
keymatic irl.
February 2013
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
