Hotpoint Aquarius F5 fault, turned machine off then back on again. Machine seemed to work but out twice the amount of water into the drum and it started to spill out past the door. Switched off at mains and then checked and found the filter was jammed yet again. Drained machine and on switching on again it won't fill with water. no fault codes and seems to work otherwise. Any ideas. Checked intake and water is getting at least to the back of the machine, due to the design of the door can't see if it's getting to the soap drawer
have a look at www.emwelec.co.uk/support it should help you with fault diagnosis
Tony
May 2013
think F5 is pressure switch stuck on full level.check for blockage in pressure chamber/hose.disconnect pressure hose to reset pressure switch.could ba a fauly pressure switch to
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.