How can I stop my Turboflush macerator T11 from continually flushing?
My Turboflush T11 continues flushing. I believe there is an air switch but by the circuit board there seems to be 2 places to attatch the pipe which one is correct and will this solve the problem?
when I took mine apart the same pressure switch was there, with two places to push the tube. I cut a little bit , 4mm, off the end to give a tight fit then replaced it. It was attached to teh larger diameter side of the sensor ie the part furthest from the PCBoard. I presume the other side is for switching for something which switching when the pressure falls below a level at which it needs maintaining. Anyhow it is definetly the side furthest away from the board that mine is attached to.
Rob
November 2013
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix plumbing.