I have the same problem, hot for 10 seconds, cold then hot again. I have checked that the flow rate isnt restricted and following advice from the technical department, I have ordered a Thermal cutout part. Will change this and report back on my findings.
Neil Davies
December 2008
Hi
I am having the same trouble, I have taken the cover off and found that there is a loose conection (wires are all burnt) on the thermal cut out switch that is connected to the outlet pipe (item number 5 in the user guide). I will order a new one and let you know if it works
Mart.G
November 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
