We have a Nilfisk multi 30T in our workshop that either needs new brushes or motor.
How do you get into the top to access motor please there is no screws under handle cover or under neath!!
Thank you for your help.
sorry didnt explain correctly! The instructions posted by hwk to open a nilfisk 20 are exactly right it works well. Again, anyone any advice on getting the brushes?
tim
November 2016
Yes thats it exactly. Thanks for posting this. o you know hwere is best to get new brushes for this machine?
tim
November 2016
I opened a Nilfisk Multi 20. Use a flatscrew driver to click the cover of the grip of the cleaner. Remove with a torque key the screw on the backside. Use the flatscrew driver to lift the powercord pedal on the front side perpendicular to the grip. It is clipped on the grip where it swings. Use the same torque key to remove the second screw. Finally remove the inlet cover by pulling it out.
Hwk
April 2015
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
