pilot light wont stay on?

Just fixed mine.

blocksge in pilot injector.

SWITCH GAS OFF AT MAIN

remove nut at base of pilot tube ang remove injector.

strip a piece of electrical flex and use a single strand of wire as a pricker and look through to make sue tube clear, reassemble making sure nut leaktight.

switch gas back on and try.

if the imjector is blocked thermocouple dosnt get hot enough

NO LIABILITY TAKEN IF YOU FOLLOW THIS PROCEDURE!!!

martin
December 2006

got the same problem

Sounds like thermocouple or valve block

these sites may be of interest.

http://www.glow-worm.co.uk/service/documentation_noncurrent.asp

http://www.keeptheheaton.com/acatalog/glowworm.html?gclid=CI73ydn2mYkCFQJPQgodnHkoUQ

jmc

Martin
December 2006