My sime 100c combi's heating works but there is no hot water?
I have a Sime 100c format combi boiler, it is 18 months old and the hot water doesnt work. The heating does and i cannot locate any leaks. The pessure is ok and i have tried turning it completely off and back on with a small hope it would help.
Can anyone help??
Its usually not the flow switch because it need the preasure difference to change the switch over its the diaphram the problem is they are not very good with the dirt in our water systems so when your boiler calls for water to heat the dirt follows and wears the diaphram they are about £25 and difficult to get at but it beats having a cold bath
Alan
February 2010
I think u will find it is the diverter valve. Had the same problem myself last year. I had the diaphram changed and it seemed to be ok for a while but having the same problems again. It may need the full valve this time, about £85 online.
Leigh
April 2007
Yea bobby rob, it is the 100 e. Whats the problem and how do i fix it?? Thanks.
sean
January 2007
do you mean a 100 e not c reply to this and i will cure your problem
bobby rob
January 2007
flow switch problem
lee
January 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
