My panasonic lv60 portable dvd player won't turn on. When it is plugged in through the ac adaptor or running on the battery it shows a red light meaning power is supplied, but when I try to turn it on(by holding down the "on" button) the red light flashes and the word "hold" comes up in the display window. When I release the "on" button the flashing stops and "hold" disappears from the display window. It does not power up. When I push any other button while power is supplied, it also flashes the red light and displays "hold " in the display window.
Thanks for any info,
Nicholas.
My Panasonic DMR-ES40VS VHS / DVD Recorder Silver was working fine and then all of a sudden one day, it wouldn't turn on. I checked the outlet and it works. Please help
chris
November 2020
CD player SL-SW945
When I press power button the unit turns on and then turns off in about one sec. If I hold the power buton in it will run and play, as soon as I release the play button it turns off. Help
artazz
March 2012
the spectroniq dvd player wont turn on. how do you turn it on?
brianna audain
March 2011
Have you checked if the HOLD switch is turned ON?
It's on the right side of the unit (to the side of the main controls.)
Other causes of red LED flashing.. LINE IN turned ON, this should be OFF when playing discs.
Instructions for Factory Reset are posted below if required.
Cobweb
January 2005
Seems it's not possible to post certain text characters here.
The below should read...
When the unit is stopped, press and hold "PAUSE", "SKIP BACKWARDS" and "PLAY" on the main unit for about 3 seconds until the message "Initialized" disappears from the screen, then turn the unit off.
Cobweb
January 2005
Repost of Instructions for Factory Reset (only use if required), please check below first.
While the unit is stopped, press and hold [||], [|
Cobweb
January 2005
Have you checked if the HOLD switch is turned ON?
It's on the right side of the unit (to the side of the main controls.)
Other causes of red LED flashing.. LINE IN turned ON, this should be OFF when playing discs.
_____________________
FACTORY RESET:
If you want to reset the unit to factory settings.....
While the unit is stopped, press and hold [||], [|
Cobweb
January 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
