I figured out where to attach the spring for the blade pully cable.
The cable goes through the support bracket from the rear so it is facing the front of the mower. There are two small pullies in the middle of the mower deck the pully on the right has a small piece sticking straight up from the middle of the pully, when the spring is attached to this it engages the the blades, this piece has a hole through it at the top. The spring has a hook on it but I couldn't get the hook through the hole so I slid it over the piece and put a keeper pin through the hole to keep the spring in place. Works like new. Hope this helps because I just about pulled my hair out trying to figure it out. I'm glad my granddaughter wasn't around, she probably would have learned some new words!!!!!!
Teresa
May 2007