How can I reset my imobiliser key fob?

Hi.
I need to reset a Renault key, from a mod 2000 - but the dealer says because the key was not ordered with the Chassi number, the key is useless.
Is there a way around this?

Dan
November 2012

how can i get code reset my keys

peter
February 2012

depends on what car you have I have a Nissan you need to :place your key in the ignition and switch from the LOCK position to the ON position 6 times within 10 seconds ending with the key in the lock position.
if done correctly should flash 2 times
press and hold the UNLOCK button on your key fob and while keeping it pressed then push the LOCK button.
if done correctly the indicators should flash 2 times.
take your key out and test your key fob works ok

Tracey
August 2010

hi i have an ford transit crew cab long w/b h/r and the imobiliser is temperment wat can i do?

warren
May 2010

FOR A MITSUBISHI SHOGUN 2005 DID MODEL PLEASE

STEVE
September 2009

hi i have a audi a4 i have replaced the batteries and key fob will not work

gary
August 2008

1. Open the key fob case.
2. Remove the old battery carefully.
3. Press both of the buttons one at a time for at least 10 seconds.
4. Fit the new battery, positive "+" side facing upwards.
5. Reassemble the two halves of the key fob.
6. Press the lock button (the right hand button) 4 to 8 times next to the vehicle the press the left hand button once.

James Mac
June 2007

1 unlock the vehicle using the key. 2 hold the remote control close to the vehicle. 3 press the remote control padlock or dimpled button 4 times or more in quick succession.

hope this help

alan
May 2007

Hi there,

You'll probably have to reprogram the remote to your car. Tech-Tronics in Manchester are a good place to call. They have a simple kit (which comes with a brand new fob) allowing you to do this. Its very plug'n'play.

Cheers

Steve

Steve C
May 2007