How can i fix my Lumicron LDC-618Z3 digita camera?

Can you please give me a place where I can get my camera repaired. It is a Lumicron LDC-618Z3

Mrs Susan Hepworth
September 2009

I have this camera and had the same problem with batteries being fully charged but camera not working.We brought new batteries but the problem was the memory card.Try taking the memory card out, giving it a clean then re-insert.Hopefully like mine it will work.

Lumicron purchaser
July 2009

the shutter will not open, the batteries are fully charged and they are in the correct way.lunicron customer services do not reply to my telephone calls, does any one out there know how to fix this fault. has anyone else had problems with lunicron helpdesk.

zoe
April 2009

put your disc that came with the camera in the computer. when it starts up do 1&2 or it wont work!!!(look on page 70 of user guidehow to install software)(its on the disc)
1) install driver first by pressing windows xp/me on window that pops up.it will then install xp driver when its finished installing xp driver
2) press xvid it will now install the xvid driver. another window will pop up press the xvid that ends with .exe it should the install the xvid driver
3)(optional) install applications by pressing on there name
4) make shaw your battery is charged and conect the cable to the camera and to the computer wait for a couple of minutes the computer will install it automaticaly (you dont have to find any programs in windows to install your camera)
** if it doesnt find your camera switch the camera on it should the install it automaticaly

dotty andy
June 2008

how can ı fix my valume controle

Mohammaddin
November 2007

Don't know if this is any help, but I do not think you need to set up any software. I have the same camera, and the PC wouldn't recognise it either. I then de-installed all related Lumicron software, just plugged the lead into the camera and into the PC, switched on the camera, and Windows XP recognised the camera as another hard drive by itself after a little while. You can then just copy pictures off the new "camera drive" (you can see it in Windows Explorer) into your My Pictures etc. on your computer just as any other file you copy.
Tip: You may have to jiggle the connector and push it in quite hard on the camera - as I said, mine didn't recognise it to start with, but eventually did. Good luck.

J Schandel
August 2007