glowworm ultimate 40ff?

I had this same problem, eventually found that it was sparking on the case as mentioned. I used insulating tape like others, but will now look at replacing with a more sturdy fix. Thanks

MJD1066
November 2008

Got the same problem with my ultimate, its sparking but not firing up, I have looked and realised that its actualy sparking onto the casing and the wire is slightlty charred, insualting tape works for a while but a new lead is required.

Tony m
January 2008

A common problem on the ultimate is the ignition lead shorting out on the casing where it enters the combustion chamber, I find that insulating the lead with silicone tubing cures this problem.
I have found them insulated with electrical tape, this works fine for a while but the heat causes it to break down.

gary.wright53@googlemail.com
July 2007

it is either a choked pilot or the electrode is faulty the message is not getting back to the pcb to go to the second stage this is a job for a competent corgi registered engineer

ricky
July 2007

If you do find out, please let me know!

Andy
June 2007