how do i derestrict a yamaha jog r?

I want to know how to get a Yamaha Jog CS50 RR LC fully derestricted I know I need a Polini 21mm Carb Kit, Polini Team 2 Minarelli Exhaust System, Polini Minarelli Evolution 50cc Cylinder Kit and Polini 9 Roller Super Speed Variator Kit For Minarelli Engines but what else do I need to get it fully derestricted?

Josh
July 2012

you need a windygun of a tox wrench then where the kick start is ,take the plate off thats behind it then where the kickstart is there is a nut quite a big one about a 22mill take theat off then behind it there isa washer , remove it and put it all back together with out that washer , there you have it a de-restricted ped :D

leo b
January 2011

hiya guys i have a yamaha mbk mach g, i have just bought it off a mate and it has had malossi rollers and a viper exhaust..i was wondering if there is anything else i can do to de restrict it??....also when i click the left or right indicator the indicators stay on instead of flashing...HELP PLEASE...thanks...

michael
June 2010

I have a yamaha jog r 06 plate, i dont know if my scooter has a problem or is it something to do with the restrictor im not sure but when i rev my scooter to full it seems to lose power and sounds as if the engine is going real slow but it doesnt cut off, then when i release rev a little its fine its just on full rev it does it :S but my mates say they dont have that with there scooters on full rev its really weird but i would like some help? thanks

sam
February 2010

Hello i have a jog-rr from 2005,i put on it a 17,5 mm dellorto carb,and a sport exaust gianelli extra but it dosent go anywhere:(,is the same thing!can u tell me whats the problem?

andrei m
January 2010

hi got a jog 50r 55plate took washer out put sports can on it new rollers new spark plug took all restrictors out is their a restrictor on the carb that i need to look at when the bike is cold it will fly 40mph but when it is warmed up it loses power i need help

paul
December 2009

hi,
got a MBK mach g, the same as a jog (the bodywork and looks like the same engine as my mate has a Jog RR on a 58 plate but mine is on a 02 plate is still the same?!?!?!

kchambers
April 2009

hey guys n girls i have a yamaha jog rr and i am potering about at 35 m/p/h just want to know if i buy a sports exhast will this just leave me with the rollers and washer on the variator?
Thanks in advance

kimmy
April 2009

inside the carbeurettor, there is a washer ontop of the throttle block, this stops you geting 100% throttle, restricting top speed and acceleration.
remove the washer, and adjust the throttle cable.
mine is an 02plate jog R (yamaha cs50 - air cooled)

stephan
October 2008

Yamaha Jog Can Be De-Restricted By Doing The Following:

1) Removing the washer in the variator.

2) Removing the restrictor in the exhaust.

3) Removing the Rev Limiter Cable from the CDI (My cable was Black & White - '52' Plate Jog R) I think the cable is red in newer models.

Any Problems E-Mail me on gareth_j_roberts@hotmail.com

Gazza
July 2008

if its an after sale exhaust it should already be derestricted, if not wat to look for is a pipe that comes out from the pipe that is connect to the muffler kinda bit, it would be about 10" long and is crimped and welded at the end, to solve this cut off as close to down pipe, leaving enuff to crimp and weld. If u look down the hole where the pipe connects to the engine this should be about 1" in diameter if it looks smaller than the engine port than it mite have had a washer welded in the end to restrict the exhaust gases leaving which will restrict performance, this needs to be drilled out. need any more help mail me at robertsbad@hotmail.com

rob remember me
July 2007