Hoover Wind Tunnel Supreme belt replacement?

I held the belt with a pair of needle nose pliers to slide the belt around the end of the metal post

shirley
June 2010

Wow, I'm really glad I read this before attempting. I sliced my finger open trying! It's a lot of muscle. I'm debating going to the ER, if the bleeding stops soon, I won't! Be very careful, it's not easy;. I pulled hard, several times, before it worked.

Jen
August 2008

I'm not sure if this pertains to your specific model, but it's worth a try:
http://www.youtube.com/watch?v=meX8lgZo7DY&feature=related

Busybee
July 2008

join the club. It is extremely difficult to get the belt placement correct but if you look down towards the left back wheel when the vacuum is upside down, you'll see a metal post. You have to manipulate the belt into that small space and around the post. Then pull it forward and wrap it around the big black wheel. It is about an inch too short but if you really work it and roll the wheel at the same time it will go on.
good luck.

Sande
July 2007