how do i fit wm12x indesit washing machine drum paddles?

The paddle pulls forward and its the metal flap in the middle that has to be depressed a little while pulling the paddle forward, using a thin rod pressing down to release it. Before replaceing the paddle make sure the metal flap is slightly up this holds the paddle in place.

Patrick
November 2011

how easy are the to fit

D H
January 2010

hi, i have purchased three new paddles for the indisit wm12x washing machine and in the middle of were the paddle go's there is a approx 1/2 inch metal flap under each paddle, does this flap have to be up or down ? as when the paddles broke off the washing has altered the possition of these metal flaps, thankyou and your right!! they are a pile of rubbish at £10.00 per paddle!!!! they should redesign the paddles and supply at no cost to buyers.

phil mcdermott
February 2009

mine are breaking at the rate of one a week, its still under warranty at present so it will be a problem in the future.
The paddles are easy to fit just push the lugs into the holes and slide to the back of the drum. Ive had lots of practice! with this piece of cheap chinese crap

John smith
December 2007