Mend Maytag LAT8600AAL Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Find out how to mend Maytag LAT8600AAL washing machines

Mend Washing Machines

Mend Washing Machines

Mend > Washing Machines

Mend Maytag LAT8600AAL Open Manual Start

Maytag LAT8600AAL - How to open it up?

First off, a complaint: www.Maytag.com doesn't recognize this as one of theirs, so there's no manual available.....
My washers stops, but will start again if I hit it. We've graduated to a 3# hammer (thru a block of wood), and I'd like to open it up and find the loose wire/connection/whatever and tighten it down or replace it as needed.
However, I can't figure out how to open it. I thought that the top would either pry up, or slide forward/back a little and then pry up, but any more force will damage things.

Sandy Wills
July 2007

Maytag Maytag LAT8600AAL Household Appliances, Washing Machines Open Manual Start

The front panel on the Maytag LAT9806GGE, which must be a similar machine, comes off really easily. It is held on by 2 spring clips at the top under the lid and also some studs at the lower bottom sides. There is also a phlange which slides and sits under the bottom of the machine as the front slides back into position when replacing it. To release the front, you should use a large screwdriver and insert the blade end into the join and rotate. You should then be able to prise it apart gently releasing the bottom 2 studs. By keeping the bottom held away from the machine, you should then be able to release the 2 spring clips at the top. I found all this rather easy, it is getting the spring clips back on that I am now having the problem with!! However, I will find a way no doubt.

Anona Fenwick Payne
July 2007

Never mind - two small screws towards the bottom of the front panel allow it to come off, giving access to the innards. Apparently the top doesn't come off, on this model.

Sandy Wills
July 2007