How can I fix the low pressure on my Potterton Puma boiler?

how do i get the low pressure light go off my boiler

nathan
July 2010

> if you disconnect one of them it bypasses the pressure switch

thats how not to do it.

if your boiler has lost pressure open the filling loop and top up
if it keeps loosing pressure check the prv if ok then you have a leak somewhere on the system.
maybe a rad or pipework under the floor boards.

hi-spec plumbing
September 2007

i had that problem before .

If you take the white cover off, then the pcb will be in front of you with a small screw in the right hand corner, undo that and let the unit hinge towards you.

behind it you should see a valve with two yellow wires coming off the end, if you disconnect one of them it bypasses the pressure switch and you should be able to get hot water, atleast. make sure the pressure is good

i dont know what the cure is that is what i am trying to find out myself.

i am not a plumber i tried a few differnet things and it seemed to work for me it got me out of a hole.

damo
September 2007