Philips CAR 400 car radio in safe mode?

Hello,

I have my Philips car400 in safe mode, but I don't find my code. So I need the code:

90 532 622
serial # GM0400W2046749

Can you help me?

Andrew
September 2022

I know the correct code and pressing the AS key and don`t appear the 4 dashes on the display.
What is the procedure to appear the 4 dashes

Vitor Manuel Gaspar Lopes
June 2017

i need the code for my philips 400
90 532 621
DC 396/75E
serial # GM0400x2277572

ranger
July 2016

My Philips CAR 400 is on safe mode and doesn't let me dial 4 digit code even pressing "AS" bottom. Can you help me?

JoaoC
December 2014

GM0400Y2846306 need code. can somebody help me?

xxxx
October 2014

The radio car 400 in my opel many times I put my code wrong and it is locked completely.
He displays 7safe and after a certain period of time in case of code displays the number 7 and zeros and not the four dashes to put the code. I have the code.
If someone can help !!!!! if I can make reset!!!
thanks

stiv
September 2014

Safe 7 errors; turn on teyp then wait 10 minute. teyp will be code. then write true code

nofeartr
April 2014

Philips Car 400 Unlock Code

esmgee
March 2013

i did 3 time whrong and now show display 7SAFE.what I must do?

fuad
February 2013

hoi ik heb een opel cossa 2001
en zit een radio in van philips car 2004 hoor er in heb de code er van maar er sta 4 safe op als ik doe wat er gezegt word hou as vast dan gebeurd er niks verschijn geen streepjes voor de code in te tikken help me alvast bedankt

bertha
November 2012

als ik me as vast hou gebeurd er niks hoe kan het

bertha
November 2012

Hola, mi problema es que a pesar de tener la targeta de codigo se ha quedado fijo en 7 safe y no lo puedo desbloquear para meter el codigo, que puedo hacer? gracias.

J.L.Martin
October 2012

i have radio cassette philips car 400 serial numero it is GM0400V1524705

ayun
July 2012

1. Turn the stereo off.
2. Turn off the ignition
3. Turn the ignition back on (dash warning lights on)
4. Hold and keep down the AS button on the stereo.
5. Turn the stereo on.
6. Release the AS button after 4 dashes appear on the display
7. Now enter code (if code = 7009. Press preset button 1 seven times, button
2 once
3 once
4 nine times
If you go past you can go round again by pressing the
preset button repeatedly
8. Once all 4 numbers are correct hold down AS again until you hear a beep (2 - 5 seconds)
9. The stereo after beeping will scan to program channels
I followed the steps and worked for me
i have opel vectra with philips car radio 400

123
October 2011

where can i get the code for my car 400 radio i've misplaced it

Nan
September 2011

Hello there,

I followed the instructions step by step as indicated below:

1. Turn the stereo off.
2. Turn off the ignition
3. Turn the ignition back on (dash warning lights on)
4. Hold and keep down the AS button on the stereo.
5. Turn the stereo on.
6. Release the AS button after 4 dashes appear on the display
7. Now enter code (if code = 7009. Press preset button 1 seven times, button
2 once
3 once
4 nine times
If you go past you can go round again by pressing the
preset button repeatedly
8. Once all 4 numbers are correct hold down AS again until you hear a beep (2 - 5 seconds)
9. The stereo after beeping will scan to program channels

However from step 4,5 & 6 does not work for me.

I took the list of instructions to a local var garage who advised i need to turn the radio on - drive the car about for quite a while - and after a certain period of time the safe mode will automatically will start flashing into the 4 dashes (which i need to in order to enter the code)

Can you please confirm this is correct?

Please advise / update ASAP

Joseph
September 2011

Many thanks to pat for your answer on how to unlock astra car 400 radio in safe mode.
Worked first time saved me on headache tablets.

Marty.p
August 2011

i have a philips car 400 as well but mine says safe and when i press as it says 7 safe can any 1 help

vanco
April 2011

can anyone unlock my radio philips car 400 gm040013116351 is stamped on the side

matim stallard
January 2010

i have a philips 400 stero as well but mine says safe and when i press as it says 7 safe can any 1 help

scott
January 2010

how to obtain a code ,i called phillips customer care they cannot do, but i got all the numbers mentioned in the radio (back ,front side and back )

tom
December 2009

Timothy Pimlott - Many Thanks for your help

Mr G
November 2009

How and where can i find the code for my philips car 400 radio? GM 90 506 173

Vish
February 2009

Many many thanks to Pat,
Your process for unlocking a 'safe' mode Philips Car 400 radio worked first time on my Vauxhall Astra after a battery change.
Regards

Dick tanner
August 2008

on some radios you haveto wait for an hour with the radio switched on befor trying to enter the code after it had the code enterd incorectly try this befor trying to enter the code

Timothy Pimlott
October 2007

on some radios you haveto wait for an hour with the radio switched on befor trying to enter the code after it had the code enterd incorectlytry this befor trying to enter the code

Timothy Pimlott
October 2007

1. Turn the stereo off.
2. Turn off the ignition
3. Turn the ignition back on (dash warning lights on)
4. Hold and keep down the AS button on the stereo.
5. Turn the stereo on.
6. Release the AS button after 4 dashes appear on the display
7. Now enter code (if code = 7009. Press preset button 1 seven times, button
2 once
3 once
4 nine times
If you go past you can go round again by pressing the
preset button repeatedly
8. Once all 4 numbers are correct hold down AS again until you hear a beep (2 - 5 seconds)
9. The stereo after beeping will scan to program channels
HEY PRESTO !!
TURN IT UP - play LOUD!!!!!!!!!!!!

Pat
October 2007

90532621

kamil
September 2007

i have the same problem.. can any one please help

Yawor
September 2007