I changed the spark plugs and fuel filter. I checked with a screwdriver to see if it was getting a spark and it's not. It ran ok before I changed everything. Could the module have gone bad? And how can I tell?
I changed the spark plugs . I checked with a by removing the spark plug by removing it and grounding it againds the block to see if it was getting a spark and it's not. It ran ok before I changed everything.
lisa
July 2008
You stated that you used a screwdriver to check for spark. You may have damaged the electronic ignition. They are design where they must have a spark plug or high-tension leads grounded to the engine when you turn the starter. If not, the ignition module may fail.
Bob M.
December 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
