I have a Hotpoint Aquarius 1200 (Wm64) will not take conditioner?

i dont agrree with any of the above remve your drawer and clean out the blue plastic fabric compartment it will be blocked when you have removed it you will see two small pipes one will be slightly slanted pull them off and clean them this will now allow the conditioner to syphon when the machine adds water,

darren
April 2005

Your best bet is to replace the valve completley as these are often cheap to replace and are the most commen failings on automatics rather than the timer, timers cost around £90 so if it was the case your better off just ignoring it and just using a 2 in one fabric conditioner.

will
April 2005

have you checked the corect valve? if you have it looks like the programer

aa
April 2005