a bit complicated if you dont know what you are doing . special tools needed plus you need workshop manual . you dont need to get pump re programed . what you do is get the pump virginised . this takes all codes off .once pump is fitted and it starts up the pump automaticaly programes itself .just read the manuel a few times regarding fitting . if you have no mechanical knowledge i wouldn't atempt this task .
TONY CARR
October 2012
This is not an easy job and even once you've done it you will need to pay a Ford dealer to program it to the van because of the immobiliser.
MrMPuk
October 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.