the switch is moning left to right as before but i dosent work! i.e. it doesnt switch the boiler on or off.
it is on continuously. the only way to switch it off is to use the switch on the boiler itself.
please help
My bolier only works when hot water and heating on but not all the time can anyone help as it's getting cold and I have kids
Lizzie
December 2016
thanks so much I just did the holding the + and - under the clock and my boiler has clicked in again, awesome.
Nikki
November 2016
check out in your area for council vans putting new heating in the houses and speak to the sparky they only throw the old ones away and keep a few for spares in the vans
mick.
February 2010
Pull your sliding switches out and adjust the electrodes
David Sawyer
December 2008
I don't know if you tried this but ours was doing the same not turning off whatever we did so I by chance put my hand on the instruction book and it said to reset push the + and - under the clock together for 2 seconds and it will reset we did this and it has worked, not sure if this will solve problem long term but it beats having to go out today and spend £50+ on a new control panel good luck
sara
April 2008
you nee a potterton EP2002 about £55.00 from plumb base fairly straight forward to install.
graham
October 2007
Hello Keith! the problem you discribe is very common to the Mini Minder E clock when its worn out, this model is no longer made and is not repairable, all existing stocks were bought up by the trade a long time ago, the only answer is to have the clock replaced with a different model and wired accordingly.
howtomendit.com for free repair help, information and advice.
