Matsui DVDR100 stanby light on nothing else works?
Was looking at some images from a CD when all stopped working. Operation of any buttons on the remote control or front panel had no effect. Disconnected mains, leaving it for a few minutes, switching back on has no effect. All that shows sign of life is the stand by lamp. Any comments welcome
SAME PROB HERE MATE,BUT WHEN I DISMANTLED THE PSU I NOTICED THE RESISTOR R24= 1000 OHM (1K) WAS GRILLED AND DEAD ( NO READING OR BUZZING ON DIGITAL METER).
REPLACING THE RESISTOR SHOULD CURE THE PROBLEM.
Poorslave
October 2008
Found the reason for the problem.
On the remote contol unit one of those daft little rubber buttons was stuck "down" in it's recess. So all you operators of Matsui remote controls beware.
Geo
Geo
April 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
