How to mend Scantronic 9448

10

Scantronic fault?

we have a scantronic 9448 that has sounded off when mains power was restored following a power cut.I've used m... [Read more]

4

how can I fix my scantronic hardwired control panel 9448+ outside alarm box?

Hi, we have a hardwired control panel 9448+ alarm system. The outside box does not flash and nor is the alar... [Read more]

2

Scantronic 9448 intruder alam help needed?

The entire street had a powercut and since then our alarm has been activating throughout the day,we can stop i... [Read more]

4

alarm don't work?

I've wired it up now but it don't work like it says it should,I've taken some wires out and swapped them but i... [Read more]

12

Scantronic 9448+style alarm?

My parents recently had a power cut at home and this seems to have disabled there alarm (scantronic 9448+style... [Read more]

2

alarm has went dead?

after a power cut my scantronic 9448+ has packed up i have no lights on the keypad or the main box in the atti... [Read more]

4

How to shut off a Scantronic 9448+ alarm when there is a power failure?

Our external alarm sounds when a power failure occurs and will not acccept reset codes so the alarm sounds for... [Read more]

3

Scantronic 9448+?

Hi Just moved house, was unsure of code on my scantronic 9448+ to cut a long story short we tried the code we... [Read more]

3

alarm will not let me program?

scantronic 9448 panel brand new replacing old 9448. all wiring the same,one set door contacts,2 pir,s.all un... [Read more]

5

Scantronic 9448 tamper light and pulsing alarm when I enter code?

I have a scantronic 9448 alarm about ten years old. When I enter my code to set my alarm it begins to sound a ... [Read more]

3

how can i get my scantronic 9448 up & running again?

the alarm got disabled somehow during building work, at the time the alarms all sounded. now we cant get it wo... [Read more]

3

How do I re-set a disabled Scantronic 9448+ alarm?

Electrician had to turn the mains power off to do a job and when he turned the power back on, the alarm sounde... [Read more]

1

gts ?

see below - scantronic 9448 change user code

16

scantronic 9448 change user code?

how do I change my user code on my scantronic9448 alarm panel? Please help me. Thanks.

3

how do you change user code on a scantronic 9448+?

how do you change user code on a scantronic 9448+

4

I have just fitted a new battery to my scantronic 9448 alarm?

How do I reset /get my system to work again

6

scantronic 9448+Stle alarm System?

The control panel dosent show any lights, the fuse is ok. The alarm will not set and no tones emit when button... [Read more]

4

do i need to enter engineers code to dis-connect external bell box and repl?

hello need some advice, have tested bell-box which has a supply present from alarm panel of 12v d.c,the o/s so... [Read more]

5

how can i fix my scantronic 9448+?

i have an intermittent fault on the tamper circuit, a local engineer has checked the system but was unable to ... [Read more]

2

How to connect a Defender Bell Box to a Scantronic 9448-90 panel?

Can anyone give me the wiring connections for the above.