How to mend ... Husqvarna

how to adjust carb?

husqvarna 388xp it sounds like its loading up when i run it wide open. then it made aloud pop like it back fir... [Read more]

How do I remove clutch from husqvarna 359 chainsaw?

I can no longer tighten chain to proper tension, I suspect the clutch may be worn. How do I remove the clutch ... [Read more]

husqvarna 41 oil pump adjustment?

how to decrease oil flow onto bar

my Husqvarna 350 chainsaw has spark, but won't fire. ?

The saw got really hot when I was operating it, and it died. I haven't been able to start it since then. It ha... [Read more]

how can I fix chain oil leak on a Husqvarna 365 ?

How do I replace o-rings for the chain oiler?

Husqvarna 350 Chainsaw (Reconnect Fuel Line?)?

Fuel spilling out when chainsaw on side. Found out priming bulb fuel line come off from one of two nipples on... [Read more]

Husqvarna chain saw 359 oil leak?

Oil leaks really bad from chain oiler It will leak out even when saw is not in use. I was able to get to the ... [Read more]

husqvarna 154se chainsaw wont fire?

my chainsaw has a good spark at the plug is getting fuel has had carb rebuilt and tested ok.compression of aro... [Read more]

Husqvarna 345 fuel tank is leaking?

Husqvarna 345 fuel tank is leaking. How do I seal it?

what are the cab tung setting for husqvarna chainsaws?

need to retune chainsaw,not sure what are correct carb settings.

husqvarna 345 chainsaw?

Were can I find a schematic ,for the fuel tank handle

i cant get my husqvarna 353 to start?

how can i get my husqvarna to start and stay running?

husqvarna 345e chainsaw?

i have a fuel leak from small hole (maybe breather hole) just below small filter and pipe on the outside of pe... [Read more]

how do I fix a fuel leak in my husqvarna 335xpt?

When I put mix in my fuel tank it leaks out breifly then stops. The leak seems to get worse as time progress... [Read more]

Husqvarna 254 Chainsaw hard starting?

There are times when trying to start my Husqvarna 254 chainsaw that it tends to lock up on rotation. It would... [Read more]

husqvarna 350 fuel problem?

just wondering if anyone can help me figure out a problem with my huskie 350. it starts and runs fine for abou... [Read more]

how do I install coil in 350 husqvarna chain saw?

Is there any settings I should be aware of when changing the coil

Husqvarna 041 bar not oiling when cutting?

I replaced the bar and chain with a new one.When I remove the bar and clean it,it oils fine.When I replace the... [Read more]

Gotta fix my husqvarna 365??

My husqvarna 365 chainsaw has a problem. It starts up great, good compression, but after 10 minutes of hard cu... [Read more]

husqvarna 254 removing drive?

I need to remove the drive sprockette from the saw due to it being sheared from the clutch drum. Is this a nor... [Read more]