Need Insignia NS-M10OHD DVD/LCD wire diagram?

yes

Kwame
April 2010

I'm having the same problem too. Under the board all I see is B+ (Where #2 is B+)

______________
1 2 |
3 4 | DVD DRIVE


If you could indicate the corresponding wiring based on the above numbers that would be great

Anil
July 2009

For the power, just use a plug off a pentium four power supply it works great.

Pimaz
May 2009

how to conect to CAR FM STEREO

brian
August 2008

Need the same help on the back side the ground is clearly labeled but what is B+, Door1, ACC? do B+ and ACC get battrery + and the others Batery -?

Kurt
March 2008

I just did the same thing last week, it was fairly simple to de-solder the main power connection from the PCB. The taps are labeled clearly on the back side of the board. You can wire the power to a common source, but be sure that you connect the dome light ground to the dome light ground for your vehicle and the DVD ground to a constant grounding source. AV out taps are labeled clearly on the board as well.

Dan
January 2008