hi i have a westwood t1200 it came with no ig switch i got one off ebay it's not the same. all the dash lights work but it won't turn the starter.if i put a wire on the starter it will turn but it won't fire up. there is a spark and petrol in.just wandering if the wires are in the wrong place tryed the wires all over the switch can u help pls.my email addy is steven1557@btinternet.com.thanks steve
Dont want to offend but have you checked to make sure that the brake is engaged and the cutter bed disengaged there are electronic safetys which will prevent it starting.
failing that, put a scredriver over the celanoid contacts
or use the pull start
James
March 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
