c&k alarm system 236i/l master pin code reset?

enter your master pin (pin#1), push the * key, enter the digit "0", then push the # key. the power service and arm light will slowly flash.
enter the user number (if one alarm number enter 1) and push the # key
enter the user new pin and push the # key. the new pin number must be four digits long
enter the new pin number again and push the # key
if the pin accepted the key pad will beep twice if you make a mistake the system will reject the new pin and will beep five times try again
if no key is pressed for 5 minutes the system will automatically exit the progamming node.
exit the programming mode by pushing the * key, them the # key. try the new pin good luck frank

frank
April 2010

master pin code reset

peter batalis
February 2010

got the same problem.

Did you solve it??

pmandiola
February 2010

i just move into a house, they have c & k alarm system, but i don't know how to change the existing PIN that previous houseowner used. I need help!

Mary
July 2008

try www.ukpanels.com

Dave
May 2008