fuel lines replacement for Z825sd weed eater?

Empty Tank. Disconnect plastic fitting from feed line. push feed line into tank. Dump line and filter out. Measure line. Remove return line from tank and carb. Remove upper feed line from carb. Measure all lines. Buy 2 feet of hose. feed 1 foot of hose into tank through feed line hole. Fish out the line with a bent wire. With line out of fill hole, attach filter and spring clip. retract line through feed line hole till it measures, with 3/8" sticking out, 1 foot minus the original number. (Subtract first measurement from 1 foot and with 3/8" sticking out of tank, trim that much line from excess.) attach plastic line fitting. replace both other measured pieces and attach into tank, onto plastic fitting and to the carb. Prime 10-15 times before yanking on it.

Mike
August 2010