How can I fix my Fisher & Paykel Nemo dishwasher ?
My Nemo dishwasher seems to be stuck on rinse cycle and flashes 7 times . I tried to reset but it happens again and again.I can get it operate now and again after a good clean,but it reverts back to flashing soon after.
Check these in the following order.
1. Make sure tap is fully open.
2. Take inlet hose off and check if it has a filter & that is not blocked.
3. Check inlet valve is ok & working.
4. If all above are ok replace the flow meter.
Lincoln Appliance NZ
May 2011
check the flow meter downon the bottom left
tosh
May 2011
I can answer this question...
How can I fix my Fisher & Paykel Nemo dishwasher ?