NECHT WQP8-9325?

Hi i have a problem with this dishwasher, it seems to go through all the program etc but does not get any thing clean.

Debbie
January 2018

hi i have the dishwasher above only really used it three times how and what button do you press to empty the water what is still in the bottom.

its only abit but it will start to smell

HUGHES
December 2014

Hi Mike,

I have the exact same problem, I have found the cause to be water leaking from the door seal into the controls/ electronics. It may be due to a poor door seal or a worn latch mechanism that isn't holding the door shut & sealed. I have removed the panel & dried up all the water & it goes again. Another problem may be a sticky float tip the dishwasher back to free the float & clear it. If you find its stopping half way through a wash & tripping your MCB's on your supplies it is more than likely to be water in the electronics. If you have any luck let me know I am struggling to find spares, I will let ya know if I'm successful in my repair.

Cheers

Trev J

Trevor Jackson
June 2007

Thanks for that, the manual mentions a flooding control which brings the pump on. Perhaps that was what caused it. I just tipped the machine forwards so that the water which was inside the cabinet drained away and everything was fixed. Thanks again.
Martin

Martin
February 2007

my dishwasher is the same make. i could not get on a proggram it kept bleeping .and flashing e4. so i took it outside and tiped it upside down drained the water of and low and behold its now working. try it

sue
November 2006